Management MCQ | CO4-Safety Management | total programming code

 MSBTE Management MCQ

Safety Management

 

 

1) Safety Programmes is a continuous process to achieve adequate	2) Four E’s of Safety….	3) Which equipment is used for protection of lungs?	4) Electrical insulation should be tested	5) Repair work should be done after switching the
a)Profit	a)Engineering, Education, Enlistment, Enforcement.	a) Hard Hats	a) Frequency	a) Power on
b)Sales	b) Engineering, Education, Enlistment, Environment.	b)Shields	b) Monthly	b) Power off
c)Safety	c) Environment, Education, Enlistment, Enforcement.	c)Gas Masks	c) Periodically	c) Shut down
d)Loss	d) Engineering, Economic ,Enlistment, Enforcement.	d)Apron	d) Daily	d) All of the above
Ans: <c >	Ans: <a>	Ans: <c>	Ans: <c >	Ans:< b>

6) You should wear eye, head and face protection if you are working with which of the following tools	7) The most dangerous place to use electrical equipment’s is	8) Which equipment is used for protection of eyes?	9) One way to learn to operate your equipment properly and safely is to read.	10) Safe and proper equipment operation generally includes
a)portable abrasive wheel tools	a)Near a ladder	a)Face mask	a)safety datasheet	a)Inspection and maintenance
b)Electric tools	b)Outdoors	b)Goggles	b)Manufacturer’s instructions	b)Warming it up
c)Pneumatic tools	c)Near  water	c)Gas mask	c)OSHA’s general duty clause	c)Knowing how to contact emergency
d)Liquid fuel tools	d)Near other electric equipment’s	d)Asbestos clothing	d)none of above	d)All of above
Ans: <c>	Ans: <c >	Ans: <b>	Ans: <b>	Ans:<a>

 

1) SOP means	2) Safe operating procedure is revised .	3) Who is responsible to take care of health and safety of worker?	4) SOP is a -----document	5) Who ensure to follow  safe procedure?
a)Safe operating procedure	a)No	a) Worker	a) Oral	a) Employers
b)Standard operating Process	B)Yes	b)Safety committee	b) Written	b) Workers
c)Safe operation procedure	c)Can’t say	c) Manager	c) None of above	c) Managers
d)Standard operation policy	d)None of these	d)All of above	d) Visual	d) All of the above
Ans: <a >	Ans: <b>	Ans: <c >	Ans: <b>	Ans:<d>

 

1) Issue means	2) In permit to work system  a document is	3) Confined space includes	4) Inspection is an example of	5) In work permit system , who is responsible for keeping area and staff safe?
a)Pre job check	a)Oral	a) Storage bins	a) Hot work permit	a) Issuer,Executer, Field operator
b)Post job check	B)Written	b)Silos	b) Cold work permit	b) Manager, Engineer, Worker
c)During Job check	c)Visual	c) Tanks	c) Electrical permit	c) Supervisor, Officer, Engineer
d)None of Above	d)None of these	d) Grounds	d) Ground disturbance permit	d) None of the above
Ans: <a >	Ans: <b>	Ans: <c >	Ans: <b>	Ans:<a>

 

____ is a sudden and unfortunate happening which causes damage or loss of property , material or human	General causes of accidents are as follows	Which of the following may be the cause of accident?	Taking shortcuts and lack of adequate knowledge are causes of accidents because of ______	Why should near misses be reported?
a) Accident	a) Accidents due to dangerous machines	a) Overconfidence of the employee	a) Workers	a) To educate employees
b) Activity	b) Unsafe physical conditions	b) Proper training	b) Management	b) To test  the first aider
c) Process	c) Moving objects	c) Sound knowledge	c) Faculty layout	c) To ensure complete recovery
d) Movement	d) All of the above	d) None of the above	d) Natural disaster	d) To stop a more serious event occurring
Ans: <a>	Ans: <d>	Ans: <a>	Ans: <a>	Ans:<d>

 

An accident is	I can help prevent accidents by	In case of accident, the victim should immediately be	Accidents are	If i have an accident or injury I should
a)An unsafe act	a)Using my own equipment’s	a)Asked to take rest	a)preventable	a)Fix what I broke
b)An unsafe condition	b)Doing only what I am trained to do	b)Enquires about the accident	b)Costly	b)Tell my supervisor
c)Unplanned , something that happens by chance	c)Riding in car pools	c)Attended  to	c)Part of life	c)Keep working and not worry about it
D )None of the above	d)Helping others with their jobs	d)Left to himself without treatment	d)Both a and b	d)Report it within a week
Ans: <c>	Ans: <b>	Ans: <c>	Ans: <d >	Ans:<b>

 

1) The responsibility of fire prevention belongs to	2) I can prevent electrical fire by	3) Fire extinguishers have a short use period of about	4) Which of the following colours allows you to identify a foam fire extinguisher?	5)The acronym for putting out a fire using a fire extinguisher is PASS. What does PASS stand for:
a)Manager	a) Non turning on lights	a) 8-15 sec	a) Blue	a) Pull, Aim, Squeeze, Spread
b) Supervisor	b) Never plugging anything into a outlet	b) 1-2 min	b)Red	b) Pull, Accuracy, Squeeze, Spread
C) Everyone	c) Both a and b above	c) 2-3 hours	c) Yellow	c) Pin, Aim, Squeeze, Sweep
d) Fire department	d) Not overloading electrical circuit	d)4-5 days	d) Cream	d) Pull, Aim, Squeeze, Sweep
Ans: <c>	Ans: <d>	Ans: <a>	Ans:<d>	Ans:<d>

 

6)Which of the following types of materials is responsible for fuelling a Class A fire?	7) In the event of a fire, everyone is responsible for:	8) What type of permit is needed in order to carry out work that could potentially result in a fire breaking out on the work site?	(9)What class of fire was a Combustible Metal.?	(10) Who has the authority to pull the fire alarm after discovering a fire on the worksite?
(a) Oils that you typically cook with	(a) Informing the supervisor of what is happening.	(a)A fire permit	(a)Class A fire	(a) Only the manager can activate the fire alarm
(b) Flammable liquids	(b) Pulling the fire alarm if they see a fire.	(b) A hot permit	(b)Class D fire	(b) Anyone who has seen a fire can activate the fire alarm.
(c) Electrical Equipment	(c) Making sure everyone gets to the fire assembly point safely	(c) A work permit	(c)  Class F fire	(c) Only the health and safety rep can activate the fire alarm
(d) Wood, plastic, paper, and other kinds of solid materials	(d) None of the above	(d) No permit is needed	(d)Class B fire	(d) Only the owner can activate the fire alarm.
Ans: <d>	Ans: <b>	Ans: <b>	Ans: <b>	Ans:<b>